Drop In Ready

The post Firing Pin for 2500X/Trident first appeared on Precision Quest Products.

• Weighs 2.5lbs
• Easily added to your current Rear Mechanical Rest by PQP
• 2 Screws to attach
• This is for the Double Plate ONLY
• Rear Mechanical Rest is SOLD SEPARATELY

The post Double Plate for Rear Mechanical Rest first appeared on Precision Quest Products.

• Available in 1-2″ or 1″
• Lifts up your Rear Dog Bone
• Anodized Black Aluminum
• Comes with Screws
• works on Rear Mechanical Rest, Joystick Rest, Heavy Rest, and Lite Rest

The post Dog Bone Spacer first appeared on Precision Quest Products.

• Sold as 1 piece
•  1.75″ Diameter
• 1-Piece Stainless Steel Base with rubber bottom
• 1″ Tall

The top dimple holds the rest foot point with no wobble, and the rubber is extremely stable on the bench surfaces of concrete, wood or glaze coated concrete. These prevent damage to the bench top from the point on the rest leg.  This is extra tall and is sold as 1 piece.

The post 1″ Tall Superfoot Rest Base by PQP first appeared on Precision Quest Products.

The post Bump Stop for PQP 1-Piece Rests first appeared on Precision Quest Products.

*Convert Joystick Rest to a Heavy Rest with Knobs for Windage adjustment

* MANY JOYSTICK RESTS WILL REQUIRE YOU TO DRILL 2 HOLES IN ARM

*New rests have the holes in the arm for either Joystick or Heavy Rest Setup

*Rest arm needs to holes to attach Push Block

*Needed Holes are 1.5″ Apart and inline with the Windage Pedestals as outlined in yellow in picture

*Needed Holes are 0.75″ from center of arm

The post Heavy Rest Conversion Kit first appeared on Precision Quest Products.

*Use with PQP Superfeet

* Comes with 1/4-28 Screw to attach to your rest

*Holds 3 Superfeet 1-3/4″ in Diameter

The post Superfeet Holder first appeared on Precision Quest Products.

Carry Handle for your rest so that you can pack it with one hand.

***WORK REQUIRED*** If you already have a rest.  All New Rests as of May 2024 will come ready to install the Rest Handle

The newer Rests are pre-Drilled and Tapped for the carry Handle, older rests are not

Your rest will need to have 2 holes drilled and tapped to accept the 3/8-16 Screws

Instructions will be included on the location of the screw holes.

This package contains the following

• 1 Handle
• 2 Handle Side Pieces
• 6    3/8-16 Flat Head Screws

You must provide the Drill and the tap.

The post Rest Handle for 1-Piece Rest first appeared on Precision Quest Products.

Attaches to the Threaded Front Post and allows you to quickly swap out both Front Tops made by PQP, Delrin Top and Fuzz Button Top.

This also fits most other quick change tops made by Arnold Machines, Randolph Machine, and Pappas.

***DOES NOT INCLUDE BUMP STOP***

Does Include 1/4-28 Screw for attachment and Spring Pin for Clocking the plate on the Threaded Post

The post Front Top Adapter Plate first appeared on Precision Quest Products.

Comes with 2 Screws for Attachment to PQP Rest

Enables you to rest your hand on it while your Finger is on the trigger of your rifle.

The post Hand Rest for Rifle Rest first appeared on Precision Quest Products.