Precision .22lr rifles perform better when the Combustion Ring is cleaned out of the bore.  The Combustion Ring forms right where the bullet leaves the brass.  It will build up and you will push your lead bullet through it every time you chamber a new round.  This is detrimental to ultimate accuracy.  The 10″ Rifle Chamber Cleaning Rod by PQP is a short rod that does not rotate.  You use this rod along with a brush to scrub the combustion ring out of the barrel.  This will help keep your rifle as accurate as possible.

The post 10″ Rifle Chamber Cleaning Rod by PQP first appeared on Precision Quest Products.

This rod locker works with the 44″ Rifle Cleaning rod by PQP(sold separately). The Rod Locker will help protect you cleaning rod while not in use and while traveling.  The Rod Locker is long enough to leave your jag or brush on the cleaning rod while being stored.

CLEANING ROD SOLD HERE

The post Cleaning Rod Locker for 44″ Rod by PQP first appeared on Precision Quest Products.

Be sure your are using the absolute best cleaning supplies when cleaning your competition rifle.  The 44″ Melonited Cleaning Rod by PQP will help you to keep your barrel clean and will help ensure you do not damage the barrel in the process.   The Meloniting process on stainless steel  brings improved corrosion resistance, improved abrasive wear resistance, improved scuffing wear, increased fatigue strengths, and a black color.  This will help to ensure that IF your cleaning rod does contact your barrel, it will not damage it.  The rod is also a .187″ Diameter to give you extra room in the 22RF bore to ensure you do not contact the barrel.  The rod is 44″ long to help clear the dirty patches beyond your long barrel and tuner.  If you are looking for the absolute best cleaning rod for your competition rifle, then the 44″ Melonited Rifle Cleaning rod by PQP is the best rod for you.

ROD LOCKER SOLD HERE

The post 44″ Rifle Cleaning Rod by PQP first appeared on Precision Quest Products.

The post Aluminum Tuner Cleaner first appeared on Precision Quest Products.

Keeping your Rimfire Barrel clean is essential to keep the best accuracy.  However, many barrels are ruined by rubbing the cleaning rod along the inside of the barrel.  Our boreguides are superior quality and will help ensure your cleaning rod remains in the center of the barrel and does not touch the barrel.  PQP Boreguides have 2 qualities that are different than your average boreguide.  1. We include an insert that fits your rod very close.  You will not be able to put a patch through the inside of the insert.  This helps to ensure your rod stays in the center of the barrel. 2. The boreguide stops at the loading ramp so that the breech of the barrel is visible, and you can watch the rod go down the barrel and ensure it does not contact the barrel.   We off 2 size of inserts that will fit your cleaning rod.  Small size is for .187″ diameter cleaning rod such as those produced by PQP.  The Large size will accommodate any commercially available 22 caliber cleaning rod such as Dewey, Hoppe, Pro-Shot, etc….

The post Boreguide first appeared on Precision Quest Products.