HOLESHOT BIG BORE MUZZLE TUNER FOR RIMFIRE

The Holeshot muzzle tuner is designed for rimfire rifles and slips onto the muzzle of the barrel approximately 1″ and clamps to the barrel. It is anodized Aluminum with easy-to-read black numbering.  It is adjustable from 0-500 and can easily be locked on your favorite setting. The end is threaded 1.375-32 to accept accessories such as the PQP Tuner Weight Kit and the PQP Precision Tube.  This is used for a barrel diameter of 0.950-1.250.  The tuner must be bored to fit your barrel with the maximum barrel size of 1.250″ and Minimum of 0.950″

SPECIFY YOUR BARREL DIAMETER AND WE WILL BORE IT TO FIT YOUR BARREL

The post Big Bore Muzzle Tuner by Holeshot first appeared on Precision Quest Products.

Drop In Ready

The post Firing Pin for 2500X/Trident first appeared on Precision Quest Products.

• Weighs 2.5lbs
• Easily added to your current Rear Mechanical Rest by PQP
• 2 Screws to attach
• This is for the Double Plate ONLY
• Rear Mechanical Rest is SOLD SEPARATELY

The post Double Plate for Rear Mechanical Rest first appeared on Precision Quest Products.

The post 45 Bi-Pod first appeared on Precision Quest Products.

• Available in 1-2″ or 1″
• Lifts up your Rear Dog Bone
• Anodized Black Aluminum
• Comes with Screws
• works on Rear Mechanical Rest, Joystick Rest, Heavy Rest, and Lite Rest

The post Dog Bone Spacer first appeared on Precision Quest Products.

• Sold as 1 piece
•  1.75″ Diameter
• 1-Piece Stainless Steel Base with rubber bottom
• 1″ Tall

The top dimple holds the rest foot point with no wobble, and the rubber is extremely stable on the bench surfaces of concrete, wood or glaze coated concrete. These prevent damage to the bench top from the point on the rest leg.  This is extra tall and is sold as 1 piece.

The post 1″ Tall Superfoot Rest Base by PQP first appeared on Precision Quest Products.

The post Bump Stop for PQP 1-Piece Rests first appeared on Precision Quest Products.

The Lite Rest is now anodized Black and Clear to give protection against scratches and really looks good.

This lightweight rest coming in at 23lbs works great for competitors looking for maximum stability of their rifle while not carrying a rest that will break your back.    The rest is wide and stable.  It has fine adjustments for windage and elevation that are tension adjustable.  Many of the top level competitions have been won on these rests.  The rest utilizes the PQP front top but will also work with the Arnold, Pappas, or Randolph Machine front tops.  If you want a simple but effective rest for your competition rifle, then the Lite 1-Piece Rest by PQP is the correct rest for you.

Carry Handle is NOW Available Separately!!!

Hand Rest is NOW Available Separately!!!

Superfeet Holder is NOW Available Separately!!!

NOW has upgraded Mariner Wheel for Coarse Adjusment w/ roller Bearings!!!

The post Lite 1- Piece Rifle Rest first appeared on Precision Quest Products.

*Convert Joystick Rest to a Heavy Rest with Knobs for Windage adjustment

* MANY JOYSTICK RESTS WILL REQUIRE YOU TO DRILL 2 HOLES IN ARM

*New rests have the holes in the arm for either Joystick or Heavy Rest Setup

*Rest arm needs to holes to attach Push Block

*Needed Holes are 1.5″ Apart and inline with the Windage Pedestals as outlined in yellow in picture

*Needed Holes are 0.75″ from center of arm

The post Heavy Rest Conversion Kit first appeared on Precision Quest Products.

*NOW ANODIZED!!! CHOOSE HARD BLACK OR CLEAR

*NOW AVAILABLE WITH OR WITHOUT CARRY HANDLE

*NOW AVAILABLE WITH OR WITHOUT SUPERFEET HOLDER

*Integrated Ammo Box Slot

*Easy to position Superfeet under Leveling Legs

*Delrin support on outside edge between Base Plate and Arm Plate

*Aluminum One-Piece Competition Rifle Rest

*Anodized to provide a better finish that does not scratch easily

*Interchangeable Front Tops available Separately

*Compatible with PQP Front Tops, Arnold Machine Tops, Randolph Machine Tops, & Pappas Tops

*3 Lockable Leveling Legs for Coarse adjustment of Elevation

*Adjustable Height on Front Top for Coarse Adjustment of Elevation

*Roller Bearings on Mariner Wheel for easy Coarse Elevation Adjustment of front Top

*Rear Fine Elevation Adjustment and Rear Joystick Windage Adjustment

*Large Knob for Fine Windage adjustment *Integrated Bubble Level for easy leveling of rest

* Integrated Hand Rest

*24″ of Fine Vertical Adjustment at 50 yards, an abundance of Windage Adjustment

The Heavy Rest One-Piece Rest by PQP is designed for Rimfire Benchrest competition but will fit any full size rifle.  This is a top of the line rest used by the top competitors around the world.  It is extremely stable. This precision rest has all of the top features that are available.  If you want the best so that you can perform the best, then the Heavy Rest One-Piece Rest by PQP is the right product for you.

The post Heavy Rest 1-Piece Rest first appeared on Precision Quest Products.